TM 5-3805-248-23-2
LOWER FRONT EJECTOR ROLLER MAINTENANCE - CONTINUED
0330 00
INSTALLATION
NOTE
Clearance between ejector and bottom of bowl must not be less than 0.30 in. (7.6 mm) or more than a 0.50
in. (12.7 mm). Rotate shaft in roller bracket to adjust clearance.
1.
Install roller assembly (5) in roller bracket (4).
4
5
394-1455
2.
Adjust roller (5) clearance to a minimum of 0.30 in.
1
(7.6 mm) and a maximum of 0.50 in. (12.7 mm).
2
4
3.
Install washer (2), bolt (1) and nut (3) in bracket (4).
3
394-1454
4.
Remove lifting device and chock blocks.
5.
Operate machine and verify correct ejector operation (TM 5-3805-248-10).
END OF WORK PACKAGE
0330 00-5/-6 Blank
