TM 5-3805-248-23-2
CRANKSHAFT REPLACEMENT - CONTINUED
0346 00
REMOVAL
1.
Install one flywheel bolt on each end of crankshaft
assembly (1). These bolts were removed as part of
equipment condition.
2.
Install lifting device on flywheel bolts in crankshaft
assembly (1).
3.
Use lifting device to remove crankshaft assembly (1)
and place on work table.
1
4.
Remove lifting device and flywheel bolts.
FLYWHEEL
BOLTS
394-1140
5.
Remove outer gear (3) from crankshaft assembly (1).
2
3
6.
Use hammer and chisel to remove spacer (4). Discard
4
5
spacer.
6
7.
Use puller group to remove dowel pin (2) from end of
crankshaft assembly (1).
7
8.
Remove inner gear (5).
9.
Remove six plugs (6).
10.
Remove dowel pin (7).
1
394-1141
0346 00-2