TM 5-3805-248-23-2
CRANKSHAFT MAIN BEARINGS MAINTENANCE - CONTINUED
0347 00
CENTER AND INTERMEDIATE BEARINGS REMOVAL - CONTINUED
NOTE
Each crankshaft bearing cap has a number
and an arrow embossed on it. The num-
bers, ranging from 1 to 7 from front to rear
of block, indicate the cap's location on the
block where it is to be installed with its
matching number appearing on outside of
block. The arrows point to front of block
when installed.
6.
Remove two bolts (1), washers (2) and bearing cap (3)
assembly.
7.
Remove and discard lower half main bearing (4) from
bearing cap (3).
3,4
2
1
394-1143
NOTE
Remove two thrust plates only if end play
recorded in step 4 exceeds 0.006-0.020 in.
(.1524-0.508 mm). If not, proceed to step
9.
8.
Remove two thrust plates (5).
5
5
394-1144
0347 00-2
