TM 5-3805-248-23-2
CRANKSHAFT MAIN BEARINGS MAINTENANCE - CONTINUED
0347 00
CENTER AND INTERMEDIATE BEARINGS REMOVAL - CONTINUED
NOTE
Remainder of this task is divided into two sections: first: removal, adjustment and installation of five
main bearings in center of crankshaft, and second: removal, adjustment and installation of two main
bearings at end of crankshaft.
Bearing and cap number 4 must be reinstalled before removing numbers 2, 3, 5 and 6.
9.
Repeat steps 6 and 7 to remove eight bolts (6), washers (7), four bearing caps (8) and lower half main bearings (9). Dis-
card four lower half main bearings.
6
7
8,9
394-1145
10.
Install main bearing removal and installation tool in oil hole of crankshaft journal.
0347 00-3
