TM 5-3805-248-23-2
CRANKSHAFT MAIN BEARINGS MAINTENANCE - CONTINUED
0347 00
CENTER AND INTERMEDIATE BEARINGS ADJUSTMENT - CONTINUED
20.
Remove two bolts (1) and bearing (4) and cap (3) from crankshaft.
21.
Remove eight bolts (6) and four bearing (9) and cap (8) from crankshaft.
CLEARANCE
GAGE
9,8
4,3
WIRE
6
1
394-1150
22.
Use the scale provided to measure thickness of each bearing clearance gage. Record measurement.
NOTE
Thickness of bearing clearance gage must
be within range of 0.003-0.0068 in.
(0.005-0.009 mm) If measurement
exceeds this range, replace crankshaft (WP
394-1151
0347 00-8
