TM 5-3805-248-23-2
CRANKSHAFT MAIN BEARINGS MAINTENANCE - CONTINUED
0347 00
CENTER AND INTERMEDIATE BEARINGS INSTALLATION - CONTINUED
5.
Install remaining bearing (9) and cap (8) assemblies.
6.
Install eight washers (7) and bolts (6).
6
7
8,9
394-1145
7.
Torque bolt (1) at bearing tab side of bearing cap (3)
TAB SIDE
and four bolts (6) at bearing tab side of bearing caps
BOLT HEAD
(8) to 190 lb-ft (258 Nm).
MARK BOLT
8.
Torque bolt (1) opposite bearing tab side of bearing
HEAD AND
BEARING CAP
cap (3) and four bolts (6) opposite bearing tab side of
bearing caps (8) to 190 lb-ft (258 Nm).
9.
Use chalk to mark two bolts (1) and bearing cap (3).
10.
Use chalk to mark eight bolts (6) and four bearing
120 DEGREES OPPOSITE TAB SIDE
caps (8).
6
11.
Tighten bolt (1) opposite bearing tab side of bearing
1
6
3
cap (3) 120 degrees.
8
12.
Tighten bolt (1) at bearing tab side of bearing cap (3)
120 degrees.
13.
Repeat steps 10 and 11 to tighten eight bolts (6).
8
8
6
6
394-1149
0347 00-10