TM 5-3805-248-23-2
CRANKSHAFT MAIN BEARINGS MAINTENANCE - CONTINUED
0347 00
CENTER AND INTERMEDIATE BEARINGS INSTALLATION
1.
Install two new thrust plates (5) on crankshaft journal
at number 4 main bearing, if removed. Be sure sides of
thrust plates (5) stamped "BLOCK SIDE" face cylin-
der block when installed.
5
5
394-1144
2.
Use clean engine oil to lubricate two washers (2), bolts
(1) and bearing (4).
3.
Install bearing cap (3) assembly on crankshaft.
4.
Install two washers (2) and bolts (1). Hand-tighten two
bolts (1).
3,4
2
1
394-1143
0347 00-9
