TM 5-3805-248-23-2
STARTING MOTOR (DELCO-REMY) REPAIR - CONTINUED
0361 00
DISASSEMBLY - CONTINUED
12.
Remove four bolts (30) from end frame (29).
13.
Use driver and hammer to remove end frame (29) and plate assembly (20).
14.
Remove nut (23), lockwasher (24), washer (25), insulator (26) and bushing (27) from stud of plate (20).
15.
Remove three screws (28).
16.
Separate end frame (29) and plate assembly (20).
28
27
26
25
24
23
20
29
30
394-1375
17.
Remove two insulators (33) from stud of plate (20).
18.
Remove and discard preformed packing (34).
19.
Remove and discard cup (32) and plug (31) from end
frame (29).
13
NOTE
Removal of bushing from end frame will
cause destruction of bushing. Remove
only if inspection proves necessary.
20.
Inspect bushing (35). Replace if cracked, broken,
grooved or scored.
21.
Use driver and press to remove bushing (35).
33
32
31
20
29
34
35
394-1376
0361 00-3
