TM 5-3805-248-23-2
STARTING MOTOR (DELCO-REMY) REPAIR - CONTINUED
0361 00
ASSEMBLY - CONTINUED
13.
Install spacer (65) on drive (60) end of armature (47) shaft.
14.
Position armature (47) with shaft end of drive (60) partially through housing (2).
15.
Lubricate washer (58) with clean lubricating oil.
60
59
55 56 2
58
57
16.
Install washer (58) on shaft of armature (47).
17.
Position lever (59) on drive (60).
18.
Position lever (59) and drive (60) in housing (2) align-
ing lever with bore in housing (2) for shaft (55).
61
19.
Install armature (47) through drive (60).
65
62
20.
Install new preformed packing (56) on shaft (55).
21.
Install shaft (55) and preformed packing (56) through
69
housing (2) and lever (59).
22.
Install new preformed packing (61) and ring (62) on
shaft (55).
19
23.
Lubricate new preformed packing (63) lightly with
63
clean lubricating oil and install.
(HIDDEN)
24.
Position housing (2) and armature assembly (47) by
13
aligning housing (2) with match marks on housing
(13). Carefully insert armature (47) through field coil
(19).
47
25.
Install five bolts (69).
394-1382
26.
Install plug (57).
0361 00-10
