TM 5-3805-248-23-2
STARTING MOTOR (DELCO-REMY) REPAIR - CONTINUED
0361 00
ASSEMBLY - CONTINUED
35.
Position plate (20), insulator (44), two plates (43), four
39
washers (41), two plates (42), insulator (45) and two
38
holders (38).
37
36.
Install four screws (36).
36
37.
Position two plates (37) and holders (38) on plate (20).
38.
Install four brushes (39) and screws (40). When
20
installing new brushes, ensure brush rides freely in
holder (38).
41 42
38
39
40
44
45
41
36
43
394-1377
39.
Soak new bushing (35) in clean lubricating oil and install in end frame (29).
40.
Soak new plug (31) and new cup (32) in clean lubri-
cating oil.
41.
Install new plug (31) and new cup (32).
42.
Apply clean lubricating oil to outer face of new pre-
formed packing (34).
43.
Install new preformed packing (34) on end frame (29).
44.
Install two insulators (33) on stud of plate (20).
45.
Position plate (20) assembly on end frame (29).
33
32
31
20
29
34
35
394-1376
0361 00-12
