TM 5-3805-248-23-2
PRESSURE AND SELECTOR VALVE ASSEMBLY REPLACEMENT - CONTINUED
0364 00
INSTALLATION - CONTINUED
84.
Install manifold assembly (36), lockwasher (39), bolt
(40), three lockwashers (37) and nuts (38) on trans-
mission case.
85.
Install hose assembly (47), two flange halves (34),
four washers (44) and bolts (45).
86.
Install hose assembly (46), two flange halves (41),
four washers (42) and bolts (43).
32
87.
Install four plugs (35).
47
46
88.
Install new gasket (33).
45
44
40
43
WARNING
42
Use adequate hoist and sling for lifting.
41
Failure to follow this procedure may cause
injury. If you are injured, obtain medical
39
33
help immediately.
NOTE
38
37
34
Weight of cover is 70 lb (32 kg).
CAUTION
36
Exercise care not to allow gasket material
or other contaminants inside transmission
case. Failure to follow this procedure
could result in damage to equipment.
89.
Attach lifting device to cover (32) and install.
90.
Remove lifting device.
TRANSMISSION
35
CASE
0364 00-38
