TM 5-3805-248-23-2
PRESSURE AND SELECTOR VALVE ASSEMBLY REPLACEMENT - CONTINUED
0364 00
INSTALLATION - CONTINUED
60.
Use arbor press to install two bearings (74) in bracket
71
(73). Allow full clearance between two bearings (74).
61.
Install pin (70).
72
62.
Use clean hydraulic fluid to lubricate new seal (72)
70
and install.
73
63.
Install new preformed packing (71).
74
394-691
64.
Position cam (68) in bracket assembly.
65.
Install shaft (14).
66.
Install pin (65), washer (67) and nut (66). Torque nut
to 25 lb-ft (34 Nm).
64
65
67.
Install spacer (69), washer (63) and nut (64) and hand
tighten.
63
66
67
BRACKET
68
ASSEMBLY
69
14
394-690
68.
Position detent assembly on cam assembly. Position
54
detent in FIRST position on cam.
55
69.
Install spacer (57), washer (56) and bolt (55).
56
70.
Install spring (54).
57
DETENT
ASSEMBLY
CAM
ASSEMBLY
394-688
0364 00-35