TM 5-3805-248-23-2
PRESSURE AND SELECTOR VALVE ASSEMBLY REPLACEMENT - CONTINUED
0364 00
INSTALLATION - CONTINUED
51.
Use 0.090 in. feeler gage to position lever (142) so it is 0.090 in. from spool link on selector valve assembly (87).
52.
Tighten nut (140) to 25 lb-ft (34 Nm).
53.
Remove 0.090 in. feeler gage.
54.
Install 12 washers (82) and bolts (83). Tighten bolts to 22 lb-ft (30 Nm).
55.
Install 15 washers (85) and bolts (84). Tighten bolts to 22 lb-ft (30 Nm).
83
82
87
84
85
142
140
56.
Install four new screens (80) and eight new preformed
79
packings (81) on four sleeves (79).
80
81
394-694
0364 00-33
