TM 5-3805-260-10
5.
When the seal contacts the filter base, tighten the
filter 3/4 turn more.
CAUTION
Do not overtighten the filter.
NOTE
Use index marks on the filter as a guide for proper
tightening.
Bleeding the Fuel System
1.
Open the bleed valve on the fuel injection pump
44
Cooling System
Inspect the cooling system with the engine stopped.
Remove the radiator cap slowly to relieve pressure.
Steam can cause personal injury.
6.
Start the engine. If the engine does not run
smoothly, stop the engine. Bleed the fuel system.
7.
Start the engine. Check for leaks. Close the hood.
2.
Turn the disconnect switch on.
3.
When fuel flows from the bleed valve free of air
bubbles, close the valve.
CAUTION
If the machine is to be shipped to, or stored in, an
area with freezing temperatures the cooling system
must either be protected to the lowest expected
outside temperature or drained completely.
The machine must be level. The bowl must be lowered.
Apply the parking brake. Stop the engine.
2-56
WARNING
