TM 5-3805-260-10
When Required
To Adjust:
1.
Raise and block the chain above the adjuster roller.
3.
Move the roller to align alternate holes in the
bracket.
2.
Remove the lower bolt 1 from the bracket. Loosen
the upper bolt 2 .
4.
Install the lower bolt. Tighten the upper bolt.
Remove the blocking. Check the adjustment.
51
Elevator Upper Shaft
To Adjust:
The sprocket shaft should be parallel to the bottom shaft.
Loosen the two bolts on the clamp on one side of the
frame. Move the end of the shaft up or down. Align the
shafts. Tighten the bolts.
2-63
