TM 5-3805-260-24
FUEL TRANSFER PUMP
REMOVE FUEL TRANSFER PUMP
Tools Needed
A
B
C
2P8315
Bracket Assembly
1
3P1544
Timing Pin
1
2H3740
Bolt
1
start by:
a)
remove fuel injection pump housing
and governor
1.
Install the fuel injection pump housing on tool
(A).
2.
Remove a bolt from cover (1). Turn the injection
pump camshaft until tool (B) can be
installed ill the
camshaft.
3.
Install tool (C) in the threads of the sleeve (3).
Tighten the bolt until the sleeve can be
removed.
4.
Remove the four bolts (4) that hold the body to
the housing.
5.
Remove the body (2) from the housing.
6.
Remove the idler gear (5) from the body.
7.
Remove the O-ring seal (6) from the body.
Remove the two lip type seals (7) from the body.
8.
Remove the drive gear (9) from the shaft.
9.
Remove the key (8) from the shaft.
3-68
