TM 5-3805-260-24
GOVERNOR
15.
Remove nut (32), bolt (31) and torque control
group (33) from the fuel injection pump housing.
NOTE: Keep all of the parts of the torque control group
together for installation purposes.
16.
Push lever (36) toward the front of the fuel
injection pump housing and remove pin (34).
17.
Remove nut (35) and the screw from the fuel
injection pump housing.
18.
Remove the ring that holds lever (36) and
remove the lever from the dowe1.
19.
Remove shield (37) from the camshaft with tool
(B).
CAUTION: Pull on the shield only a small amount in each
location, so it will not have distortion or damage. The
metal of the shield is moved (staked) around the
camshaft and the shield can be damaged when it is
removed. If the shield has damage, use a new part for
replacement.
20.
Install tool (C) to hold the camshaft.
21. Remove bolts (38) that hold the flyweight assembly
to the camshaft. Remove the flyweight assembly.
3-73
