TM 5-3805-260-24
TORQUE CONVERTER
20.
Put stator (19) in position in the turbine. Install
the six bolts and two locks that hold it. Tighten
the bolts to a torque of 20 1 lb. ft. (25 1 N-
m).
21.
Install ring (20) with tool (D).
22.
Put turbine (21) in position on the shaft as
shown.
23.
Heat inner race (22) to a temperature of 275°F
(135°C) and install it on the shaft as shown.
3-170
