TM 5-3805-260-24PARKING/EMERGENCY BRAKE CONTROL VALVE4. Remove shaft (7) and the spring from valve body (I).5. Remove seal (8) from shaft (7).ASSEMBLE PARKING/EMERGENCYBRAKE CONTROL VALVE1. Install seal (1) on shaft (5). Install spring (6) on theshaft and put the shaft in valve body (2).2. Install ring (7) in the val\fs20 e body. Install spacer(3), washer (8) and nut (4) on the shaft. Hold theend of the shaft and tighten the nut.3. Install cover (9) on valve body) (2) and install thescrew.end by:a) install parking/emergency brakecontrol valve**NOTE: This operation is in INSTALL DASH CON-TROLS AND SWITCHES.3-340
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
