TM 5-3805-260-24
STEERING COLUMN
6. Remote nut (8) with a 2 ’/4 in. open end wrench.
Remove seal (7) from nut (8).
7
Remove nut (9) with tool (B).
Remote
hearing(10) from the shaft.
8. Remove two bolts (12) from the steering column
clamp. Remove clamp (lI) from the steering
column.
9. Move the mat enough to remove bolts (13). Then
lower column (14) as far as possible.
10. Remove the wire from bolt (17). Remove bolt (17)
and the washer from end of shaft.
11. Remove lever (16) with a hammer. Remove the key
from the shaft.
12. Turn stop (15) off the column.
13. Remove steering column (14) from the
cab.
Remove shaft (18) from the column.
3-342
