TM 5-3805-260-24
GOVERNOR CONTROL LINKAGE
REMOVE GOVERNOR CONTROL
LINKAGE
start by:
a) remove crankcase guard*
*This operation is in the Engine Disassembly and As-
sembly.
I. Disconnect spring (I) from the plate. Remove nut (2)
and disconnect the governor cable from the lever.
2. Loosen bolt (3) in back of the pedal. Remove shaft
(4) from the cab. Remove pedal (5).
3. Remove bushing (6) from the bracket.
4. Remove key (8). Loosen nut (10) and remove lever
(7) from shaft (4). Remove the key under the lever
and slide bushing (9) off the shaft.
3-346
