TM 5-3805-260-24
GOVERNOR CONTROL LINKAGE
INSTALL GOVERNOR CONTROL
LINKAGE
1265-12
1.
Put bushing (4) on shaft (3). Install key (2) and lever (I)
on shaft (3). Tighten the nut.
2.
Install key (5) on the shaft (3).
3.
Install bushing (7) in the bracket. Put pedal (6) in
position and install shaft (3) through the pedal and the
bracket.
4.
Connect governor cable (8) to the lever. Connect
spring (9) to the plate.
end by:
a) install crankcase guard*
*This operation is in the Engine Disassembly and As-
sembly.
3-347
