TM 5-3805-260-24
ELEVATOR SPEED SELECTOR VALVE
DISASSEMBLE ELEVATOR SPEED SELECTOR VALVE
Tools Needed
A
2P8312
Retaining Ring PLers
1
start by:
a)
remove elevator speed selector valve
1.
Remove screw (1), washer (2) and seal (3).
2.
Remove ring (4) from valve spool (5) with tool (A).
Remove valve spool (5) from valve (6).
3.
Put valve (6) in position as shown. Remove washer
(7) and the seal from the valve.
4.
Turn the valve as shown. Remove washer (8) and the seal
from the valve.
5.
Remove plug (9) from the valve.
6.
Remove O-ring seal (10) from plug (9).
7.
Remove washer (11) and the seal from the valve.
NOTE: Check the condition of the seals. If the seals have damage,
use new parts for replacement.
8.
To clean valve thoroughly remove fittings.
4-134
