TM 5-3805-260-24
ELEVATOR CHAIN ADJUSTMENT ROLLER
REMOVE ELEVATOR CHAIN ADJUSTMENT ROLLER
1.
Fasten a chain to an elevator flight and bowl brace as
shown.
2.
Fasten a hoist to the elevator chain and lift it off the roller
(2).
3.
Remove nuts and bolts (1) from the roller arm and remove
roller (2).
4.
Do Steps 1, 2 and 3 for the other side.
INSTALL ELEVATOR CHAIN ADJUSTMENT ROLLER
1.
Put roller arm (2) in position on the frame.
2.
Install bolts and nuts (1). Tighten the nuts to a torque of 300
to 315 Ib.ft. (410 to 430 N.m).
NOTE: Use 5P960 Multipurpose Type Grease on bolts and nuts.
3.
Do Steps 1 and 2 for the other side.
4.
Lower the elevator chain against the rollers.
5.
Remove the chain around the elevator flight and brace.
6.
For correct adjustment of the elevator chain see ELEVATOR
in TESTING AND ADJUSTING.
4-138
