TM 5-3805-260-24
ELEVATOR CHAIN ADJUSTMENT ROLLER
5.
Turn the roller as shown. Install spacer (6) and bearing cone
(5) in the roller.
6.
Turn roller (7) as shown, and install the roller on the shaft. Be
careful so the bearing cone and the spacer do not fall from
the roller.
7.
Install washer (9) and nuts (8) on the shaft. Tighten the nut to
a torque of 240 to 260 lb.ft. (320 to 354 N.m).
8.
Install gasket (11) and cap (10) on the roller.
9.
Fill with 5P960 Multipurpose Type Grease.
end by:
a)
install elevator chain adjustment roller
4-141
