TM 5-3805-260-24
ELEVATOR UPPER SHAFT
DISASSEMBLE ELEVATOR UPPER SHAFT
Tools Needed
A
B
1 P2321
Puller Assembly
1
1 P2320
Puller Assembly
1
L1774
Spacer
1
start by:
a)
remove drive sprockets and speed reducer
1.
Remove fitting (1) from the housing.
2.
Put identification marks for correct assembly. Remove
housing (2) from the spindle with tooling (A). The plate
fall out after housing is removed.
3.
Remove bearing (3) from the spindle with tooling (B).
4.
Remove lip type seal (4) from the spindle.
5.
Remove eight nuts and bolts (5). Remove both
sprockets (6) from the shaft.
4-136
