TM 5-3805-260-24
ELEVATOR CHAIN ADJUSTMENT ROLLER
DISASSEMBLE ELEVATOR CHAIN ADJUSTMENT ROLLER
Tools Needed
A
1P2322
Puller Assembly
1
T774
Spacer
1
start by:
a)
remove elevator chain adjustment roller
1.
Remove bolts (1) from the cap. Remove cap (2) and the
gasket from the roller.
2.
Remove nut (3) and the washer.
3.
Remove roller (4) with tooling (A). The bearing cone and a
spacer can fall out of the roller after it is removed. Inspect
sleeve on shaft and make a replacement if needed.
4.
Remove seal (5) and bearing cone (6) from the roller.
4-139
