TM 5-3805-260-24
SLIDING FLOOR LINK
REMOVE SLIDING FLOOR LINK
Tools Needed
A
1P510
Driver Group
1
1. Lift the bowl and place blocks under each side of the bowl
for support. _
2. Put the floor jack under link (I) as shown and remove nut
and bolt (2) from the rear of the link.
3. Remove nut and bolt (3) from the front of the link.
4. Remove tube (4) from the front and the rear of the link with
tooling (A). Remove the link with the floor jack. The
weight of the link is 82 lb. (37 kg).
INSTALL SLIDING FLOOR LINK
1. Put the floor jack under the link and install in position as
shown. Install tube (1) in link (2) on both ends.
4-178
