TM 5-3805-260-24
SLIDING FLOOR ARM ASSEMBLY
2. With the sliding floor cylinder and arm in alignment, install pin (2)
with a soft faced hammer. Remove wood blocks from the
cylinder.
3. Install plate (3) and bolts (4) in the pin.
4. On other side of pin, install washer (5) and bolts (6).
5. Install tube (7) in link and arm on both sides.
6. Install bolt and nut (8) in both tubes.
7. Remove all wood blocks and the floor jack from the scraper.
end by:
a)
install ejector cylinder
4-181
