TM 5-3805-260-24
SLIDING FLOOR CYLINDER
7.
Fasten a hoist to the cylinder as shown and
remove pin (8) with tooling (A).
8.
Remove the hoist from the rod end and install it
on the head end of the cylinder. Remove bolts
(9) and plate (10) from the frame.
9.
Remove bolts (I ) and plate (12) with a groove
(slot) from the frame. Remove the pin (13) with
tooling (A).
10.
Lift the cylinder and remove hose (14) under the
cylinder.
11.
Remove the cylinder from the scraper. The
weight of the sliding floor cylinder is 150 lb.
(68kg).
4-184
