TM 5-3805-260-24
SLIDING FLOOR ARM ASSEMBLY
DISASSEMBLE SLIDING FLOOR ARM ASSEMBLY
Tools Needed
A
B
1P510
Driver Group
1
1P2321
Puller Assembly
1
887560
Step Plate
1
start by:
a)
remove sliding floor arm assembly
1. Fasten a hoist and put arm (1) in position in the press as shown.
2. Remove bushing, spacer and bushing from the arm with tooling
(A) and the press.
3. On the lower end of arm (I), remove bushing with tooling (B).
Follow the same procedure for the other bushing.
ASSEMBLE SLIDING FLOOR ARM ASSEMBLY
Tools Needed
A
1P510
Driver Group
1
1. Install bushing (1) in arm (2) with a soft faced hammer. Follow
the same procedure for the other bushing.
2.
Install bushing, spacer and bushing with tooling (A) in a press.
4-182
