TM 5-3805-260-24
SLIDING FLOOR CYLINDER
INSTALL SLIDING FLOOR
CYLINDER
1.
Fasten a hoist to the cylinder and put it in
position shown.
2.
Install hose (1) under the cylinder.
3.
Lower the hoist and position cylinder so pin (2)
can be installed. Install the pin.
4.
Install plate (3) on the frame. Make sure groove
(slot) on pin and plate are in alignment.
5.
Install plate (4) on the other side of the frame.
6.
At the rod end of the cylinder, install pin (5)
through the arm and the rod. The jack under the
cutting edge can be used to move the arm for
easier installation of the pin.
4-185
