TM 5-2350-377-13&P
0012
ELECTRICAL SYSTEM - Continued
STEP
11.
Check control box wiring harness for continuity.
a.
Remove four screws (Figure 8, Item 1) from top of control box (Figure 8, Item 6) and disconnect connector
(Figure 8, Item 5) from connector (Figure 8, Item 4).
b.
Check continuity between control box wiring harness connector pins (Figure 8, Item 4) and switch
connector pins (Figure 8, Item 3).
c.
Refer to Table 6 for lead locations.
d.
Release the track loosening switch (Figure 8, Item 2).
1
2
3
6
4
5
T00408HBF
Figure 8. Track Loosening Switch.
03/15/2011Rel(1.8)root(tswp)wpno(T00004)