TM 5-2350-377-13&P
0025
INSTALLATION
1.
Install control box power harness connector (Figure 5, Item 1) on track and blade control box
(Figure 5, Item 2).
1
2
M0097HBF
Figure 5. Control Box Power Wiring Harness Installation.
2.
Remove four screws (Figure 6, Item 2) from ejector panel (Figure 6, Item 1) and move panel downward,
retaining screws for future use.
1
2
M0098HBF
Figure 6. Control Box Power Wiring Harness Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00020)