TM 5-2350-377-13&P
FIELD MAINTENANCE
HEADLIGHT LENS HOLDER AND LIGHT FILTER, LIGHT LENS, AND RUBBER ROUND SEAL REPLACEMENT
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Rubber Round Seal (Nonmetallic)
Tool Kit, General Mechanic's: Automotive
(WP 0055, Figure 10, Item 10) Qty: 1
(WP 0071, Table 1, Item 7)
Rubber Round Section
(WP 0055, Figure 10, Item 15) Qty: 1
Materials/Parts
Adhesive (WP 0070, Table 1, Item 2)
Brush, Acid, Swabbing
Personnel Required
Construction Equipment Repairer, 91L
(WP 0070, Table 1, Item 4)
Cleaning Compound, Solvent
(WP 0070, Table 1, Item 6)
Equipment Condition
Gloves, Chemical and Oil Protective
Front of vehicle blocked (TM 5-2350-262-20)
(WP 0070, Table 1, Item 11)
Hydraulic pressure relieved (TM 5-2350-262-20)
Goggles, Industrial (WP 0070, Table 1, Item 12)
Negative battery cables disconnected
Rag, Wiping (WP 0070, Table 1, Item 25)
(TM 5-2350-262-20)
REMOVAL
NOTE
Screws are captive to holder and stay on holder.
1.
Unscrew five screws (Figure 1, Item 3) on holder (Figure 1, Item 2).
2.
Remove holder (Figure 1, Item 2) from body (Figure 1, Item 1). Pull out rubber round seal (Figure 1, Item 4)
from holder (Figure 1, Item 2). Discard rubber round seal.
1
4
2
2
3
M0009HBF
Figure 1.
Headlight Rubber Round Seal Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00005)