TM 5-2350-377-13&P
FIELD MAINTENANCE
HEADLIGHT INCANDESCENT LAMP REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Equipment Condition (cont.)
Tool Kit, General Mechanic's: Automotive
Negative battery cables disconnected
(TM 5-2350-262-20)
(WP 0071, Table 1, Item 7)
Hydraulic pressure relieved (TM 5-2350-262-20)
Stand, Vehicle (WP 0071, Table 1, Item 6)
Headlight lens holder and light filter, light lens, and
rubber round seal removed (WP 0032)
Personnel Required
Construction Equipment Repairer, 91L
Equipment Condition
Front of vehicle blocked (TM 5-2350-262-20)
REMOVAL
1.
Remove five screws (Figure 1, Item 5) from headlight cover (Figure 1, Item 1) and remove cover.
2.
Roll front edge of headlight mount (Figure 1, Item 2) toward back of lamp (Figure 1, Item 4).
3.
Pull out lamp (Figure 1, Item 4) from headlight mount (Figure 1, Item 2). Pull off connector plug
(Figure 1, Item 3) from lamp (Figure 1, Item 4).
1
2
4
5
3
M0013HBF
Figure 1. Headlight Incandescent Lamp Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00006)
