TM 5-2350-377-13&P
0037
REMOVAL - Continued
WARNING
Lifting device must have a weight capacity greater than 585 lb (266 kg). Ensure dozer blade
is securely supported before removing outer pivot pins. Failure to comply may result in severe
injury to personnel.
4.
Remove pin assembly (Figure 2, Item 3) and latch (Figure 2, Item 2) from each side of apron
(Figure 2, Item 1).
NOTE
Supports for dozer blade should be about 18 in. (46 cm) high.
5.
Remove screw (Figure 2, Item 7) and washer (Figure 2, Item 6) from both outer pivot pins (Figure 2, Item 4).
Remove hull support blocks (Figure 2, Item 9) and lower dozer blade (Figure 2, Item 8) on support.
6.
Use eyebolt (Figure 2, Item 5) to pull both outer pivot pins (Figure 2, Item 4). Remove dozer blade
(Figure 2, Item 8) from apron (Figure 2, Item 1).
1
8
2
9
1
3
1
8
4
7
5
6
M0045HBF
Figure 2. Outer Pivot Pins Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00010)