TM 5-2350-377-13&P
FIELD MAINTENANCE
HYDRAULIC VALVES REPLACEMENT
INITIAL SETUP:
Personnel Required
Tools and Special Tools
Construction Equipment Repairer, 91L
Tool Kit, General Mechanic's: Automotive
(WP 0071, Table 1, Item 7)
Wrench Set, Crowfoot (WP 0071, Table 1, Item 9)
Equipment Condition
Wrench Set, Open End
Hydraulic pressure relieved (TM 5-2350-262-20)
(WP 0071, Table 1, Item 10)
Right, center, and left rear floor plates removed
(TM 5-2350-262-10)
Hydraulic hoses removed (WP 0042)
Materials/Parts
Washer, Lock (WP 0058, Figure 13, Item 8)
Qty: 2
REMOVAL
CAUTION
Be ready to secure valves located under brackets when removing fastening hardware. Failure
to do so may cause damage to equipment.
1.
Flow valve removal:
a.
Remove screw (Figure 1, Item 2), two flat washers (Figure 1, Item 5), nut (Figure 1, Item 6), two pins
(Figure 1, Item 1), and flow valve bodies (Figure 1, Item 3) from bracket (Figure 1, Item 4).
2
1
1
5
3
4
3
5
6
M0053HBF
Figure 1.
Flow Valve Bodies Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00011)
