TM 5-3800-205-23-1
TROUBLESHOOTING PROCEDURES - CONTINUED
0007 00
Table 10. Transmission Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
NOTE
Prior to removing major assembly, contact Specialized Repair Activity (SRA) for further troubleshoot-
ing information and/or technical assistance. For SRA support, contact the local Caterpillar dealer (WP
1. Machine Moves When Shift Lever is in
1. Check control linkage proper
a. Adjust control linkage (WP
NEUTRAL.
adjustment (WP 0070 00).
b. If problem still exists, notify
DS Maintenance.
2. Slow or Erratic Transmission Engagement.
1. Check control linkage for
a. Repair any damage to control
proper adjustment or damage.
linkage (WP 0069 00). If
problem still exists, go to
step b.
b. Adjust control linkage (WP
exists, go to test step 2.
2. Check for loose lines/hoses
a. Tighten any loose lines/
on inlet side of transmission
hoses.
oil pump.
b. If problem still exists, notify
DS Maintenance.
NOTE
Prior to removing major assembly, contact Specialized Repair Activity (SRA) for further troubleshoot-
ing information and/or technical assistance. For SRA support, contact the local Caterpillar dealer (WP
If temperature exceeds 270 F
1. Observe torque converter oil
3. Torque Converter Oil Temperature Alert
(132 C), go to test step 2.
temperature
gage
for
Indicator and Action Light Come On
indication above 270 F (132
(Indicates Overheating During Normal
C).
Operation).
Select proper transmission
2. Ensure proper transmission
range. If proper range was used,
range is selected for machine
go to test step 3.
operation.
