TM 5-3800-205-23-1
TROUBLESHOOTING PROCEDURES - CONTINUED
0007 00
Table 10. Transmission Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
NOTE
Prior to removing major assembly, contact SRA for further troubleshooting information and/or
technical assistance. For SRA support, contact the local Caterpillar dealer (WP 0175 00).
8. Transmission Engages, But Machine Does
1. Check for mechanical failure
a. If mechanical failures were
Not Move. Engine Stops Running.
in output transfer gears.
found,
notify
DS
Maintenance to replace
output transfer gears.
b. If problem still exists, go to
test step 2.
2. Check for mechanical failure
a. If mechanical failures were
in differential.
found,
notify
DS
Maintenance to replace
differential.
b. If problem still exists, go to
test step 3.
3. Check for mechanical failure
a. If mechanical failures were
in a final drive.
found, replace final drive
b. If problem still exists, go to
test step 4.
If any mechanical failures were
4. Check for mechanical failure
found, notify DS Maintenance to
to clutches and gears in
replace transmission.
transmission.
