TM 5-3800-205-23-1
TROUBLESHOOTING PROCEDURES - CONTINUED
0007 00
Table 10. Transmission Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
5. Transmission Does Not Operate in any Speed
5. Check for mechanical failure
a. Repair
any
mechanical
- Continued.
in transmission.
failures
found
in
transmission.
b. If problem still exists, go to
test step 6.
6. Check for mechanical failure
a. If mechanical failures were
in transfer gears.
found, replace transfer gears.
b. If problem still exists, go to
test step 7.
NOTE
Prior to removing major assembly, contact SRA for further troubleshooting information and/or
technical assistance. For SRA support, contact the local Caterpillar dealer (WP 0175 00).
a. If mechanical failures were
7. Check for mechanical failures
in differential.
found,
notify
DS
Maintenance to replace
differential.
b. If problem still exists, go to
test step 8.
8. Check for mechanical failures
a. If mechanical failures were
in torque converter.
found,
notify
DS
Maintenance to replace
torque converter.
b. If problem still exists, go to
test step 9.
9. Check for excessive leakage
a. Repair
any
leaks
in
inside transmission.
transmission. If problem still
exists, go to test step b.
b. Notify DS Maintenance to
replace transmission.
6. Transmission Does Not Shift From One
Check control linkage for proper
Adjust control linkage (WP
Direction to Another.
adjustment (WP 0070 00).
7. Transmission Does Not Shift From One
Check control linkage for proper
Adjust control linkage (WP
Speed to Another.
adjustment (WP 0070 00).
