TM 5-3800-205-23-1
CONTAINER REPAIR - CONTINUED
0164 00
REPAIR OF FACE/SKIN DAMAGE TO FIBERGLASS REINFORCED PLASTICS (FRP)
MATERIAL - CONTINUED
2.
Insert sabre saw into starter holes and cut out section to be removed. For accuracy, use a straight edge or guide.
3.
Inspect opening for any dampness that may be found in plywood as a result of exposure. A larger hole may have to be
cut to remove any damp or rotten core.
390-1916
4.
From inside of panel, mark a line 2 in. (51 mm)
around opening for a ship lap joint as shown.
390-1920
0164 00-15