TM 5-3800-205-23-1
CONTAINER REPAIR - CONTINUED
0164 00
REPAIR OF FACE/SKIN DAMAGE TO FIBERGLASS REINFORCED PLASTICS (FRP)
MATERIAL - CONTINUED
14.
Though this will adequately complete repair for a perfect finish, use a heat gun on edges to soften film. Then use a
roller to fuse and blend it into original surface. The seam should disappear. If heat gun is not available, a hand iron
or hair dryer can be used.
WARNING
Do NOT pour chemicals or paste into sinks, toilets or garbage containers. Material could set up and clog
drains or cause fire in containers having flammable contents, oily rags, etc. Failure to follow this warn-
ing may result in injury or death to personnel.
15.
Prime paint repaired area with CARC paint as required.
WARNING
WARNING
Acetone is flammable and harmful to eyes, skin, and breathing passages. Observe all fire precautions.
use only with adequate ventilation and with approved personal protective equipment. Failure to follow
this warning may result in injury or death to personnel.
16.
Clean all tools, brushes etc., with acetone. Also,
clean up work area and dispose of any resin contain-
ing agent after it has set up or hardened.
390-1926
0164 00-20
