TM 5-3805-248-23-1
ELECTRICAL ACCESSORIES TROUBLESHOOTING PROCEDURES - CONTINUED
0011 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3.
Check for voltage to wiper motor low
11. Windshield Wiper Is
speed terminal.
Inoperative - Continued.
a. Place battery disconnect switch in
OFF position (TM 5-3805-248-10).
b. Set multimeter to appropriate
voltage range (WP 0018 00).
c. Place wiper switch in low position
(TM 5-3805-248-10).
d. Disconnect wiper motor green wire
e. Connect multimeter positive lead to
wiper motor green wire (harness
side) and multimeter negative lead
to chassis ground.
f. Place battery disconnect switch in
1. If battery voltage is not indicated, go to
ON position (TM 5-3805-248-10).
Test 4.
2. If battery voltage is indicated, replace
wiper motor assembly (WP 0217 00).
0011 00-30
