TM 5-3805-248-23-1
ELECTRICAL ACCESSORIES TROUBLESHOOTING PROCEDURES - CONTINUED
0011 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4.
Check low speed circuit for
11. Windshield Wiper Is
continuity.
Inoperative - Continued.
a. Place battery disconnect switch in
OFF position (TM 5-3805-248-10).
b. Set multimeter to appropriate ohm
(Ω) range (WP 0018 00).
c. Disconnect wiper motor switch
electrical connections (WP 0063
d. Connect multimeter positive lead to
1. If continuity is not indicated, repair
wiper motor green wire (harness
open circuit between wiper motor and
side) and multimeter negative lead
wiper switch (WP 0018 00).
to wiper motor switch green wire
2. If continuity is indicated, replace wiper
(harness side).
switch (WP 0063 00).
394-1573
5.
Check for voltage to wiper motor high
speed terminal.
a. Place battery disconnect switch in
OFF position (TM 5-3805-248-10).
b. Set multimeter to appropriate
voltage range (WP 0018 00).
0011 00-31
