TM 5-3805-248-23-1
FINAL DRIVE MAINTENANCE
THIS WORK PACKAGE COVERS
Drain and Refill, Removal, Disassembly, Cleaning and Inspection, Assembly, Installation
INITIAL SETUP
Maintenance Level
Materials/Parts - Continued
Rag, wiping (Item 35, WP 0339 00)
Unit
Packing, preformed (3)
Tools and Special Tools
References
Tool kit, general mechanic's (Item 113, WP 0338
TM 5-3805-248-10
Lifting device, 450 lb minimum capacity
Personnel Required
Two
Materials/Parts
Cleaning compound, solvent (Item 8, WP 0339 00)
Equipment Condition
Oil, lubricating (Item 30, WP 0339 00)
Front axle removed (WP 0141 00)
DRAIN AND REFILL
NOTE
Use a container to capture draining oil. Dispose of oil IAW local policy and ordinances. Ensure all spills are
cleaned up.
1.
Rotate right front wheel of machine until drain plug
1,2
3,4
(1) is at bottom of wheel.
2.
Remove drain plug (1) and gasket (2) and allow oil to
drain completely. Discard gasket.
3.
Remove fill plug (3) and gasket (4). Discard gasket.
4.
Install new gasket (2) and drain plug (1). Torque to 75
lb-ft (101 Nm).
5.
Fill final drive housing with lubricating oil until level
reaches fill plug (3) opening.
6.
Install new gasket (4) and fill plug (3). Torque to 75
lb-ft (101 Nm).
394-265
