TM 5-3805-248-23-1
STEERING GEAR REPLACEMENT - CONTINUED
0176 00
REMOVAL
1.
Remove nut (6), washer (8) and bolt (7) from front left side of engine compartment.
2.
Disconnect rod assembly (5) from lever (9).
3.
Remove nut (2) and lockwasher (1) from lever (18). Discard lockwasher.
4.
Remove cotter pin (17), washer (16), pin (15) and two spacers (14) from servo-receiver cylinder. Discard cotter pin.
5.
Remove lever (18) and key (4) from shaft (3).
6.
Remove nut (12), bolt (13), lever (9) and key (11) from shaft (10).
3,4
7
2
5
8
9
6
1
10,11
12
18
15,16,17
13
394-450
14
SERVO
RECEIVER
CYLINDER
0176 00-2