TM 5-3805-248-23-1
MECHANICAL STEERING ASSEMBLY ADJUSTMENT- CONTINUED
0175 00
ADJUSTMENT - CONTINUED
5.
Remove nut (1), washer (2) and bolt (3) from rod assembly.
6.
Disconnect rod assembly from lever (4) on left, front side of engine.
7.
With assistance measure travel of rod assembly by holding a 6 in. (15 cm) machinist's ruler at rod assembly. Measure
the travel of lever (4) at hole from which bolt (3) was removed, while turning steering wheel completely to left.
1
2
3
394-448
4
JAMNUT
ROD ASSEMBLY
0175 00-3
