TM 5-3805-248-23-1
HYDRAULIC STEERING SERVO-SENDER CYLINDER MAINTENANCE - CONTINUED
0182 00
INSTALLATION - CONTINUED
6.
Bleed air from follow-up circuit (WP 0183 00).
7.
Refill hydraulic tank to proper level (TM 5-3805-248-10).
8.
Start engine (TM 5-3805-248-10).
9.
Operate steering. Move system through at least five full movements of travel. This will bleed air from system.
10.
Shut down engine (TM 5-3805-248-10).
11.
Check oil level in hydraulic tank and add if necessary (TM 5-3805-248-10).
12.
Inspect all hose and tube assemblies for leaks.
END OF WORK PACKAGE
0182 00-3/(-4 blank)
