TM 5-3805-248-23-1
EJECTOR CYLINDER HOSES, LINES AND FITTINGS REPLACEMENT - CONTINUED
0241 00
REMOVAL - CONTINUED
NOTE
Use a container to capture draining hydraulic oil. Dispose of hydraulic oil IAW local policy and ordi-
nances. Ensure all spills are cleaned up.
Tag hose and tube assemblies prior to removal to ensure correct installation.
Note routing of all hose assemblies prior to removal to ensure correct installation.
1.
Disconnect bowl intermediate hoses (WP 0240 00).
2.
Remove four capscrews (4), washers (5) and two flange halves (1) from front, left side of ejector cylinder.
3.
Disconnect hose assembly (3).
4.
Remove and discard preformed packing (2).
5.
Remove two nuts (9) and spacer (7) from ejector cylinder.
6.
Remove two bolts (11), sleeves (10) and clamp halves (8) from hose assembly (6).
4,5
3
1,2 (HIDDEN)
6
394-559
9,10,11
7,8
0241 00-2
